Certification Training for 220-1001 Exam Dumps Test Engine [2022]
Jan 17, 2022 Step by Step Guide to Prepare for 220-1001 Exam
NEW QUESTION 56
A technician is connecting an LCD projector to a laptop. The image displayed by the projector does not align property with the top corners. The laptop screen is black, preventing the technician from changing the resolution settings on the computer. Which of the following is MOST likely affecting the projector's display?
- A. VGA mode function
- B. Disconnected cable
- C. No image displayed
- D. Distorted geometry
Answer: D
NEW QUESTION 57
A member of the training team is having recurring issues with connectivity loss between the workstation and the projector in the training room. Adjusting the HDMI cable and connectors between the devices reestablishes the
'connection but sometimes only for a few minutes. This issue has been reported numerous times in the past few months, and it disrupts training classes every time it happens. Which of the following will MOST likely resolve the issue permanently?
- A. Replace the HDMI cable between the workstation and the projector.
- B. L Replace the workstation and install the appropriate video drivers
- C. Replace the projector with an LCD flat-panel display.
- D. Replace the graphics card in the computer.
Answer: A
NEW QUESTION 58
A technician received a call that the network printer was printing garbled text. The technician printed a test page from several users' workstations and received the same result The technician then ran a diagnostic on the printer, and everything passed After uninstalling the printer from a user's workstation and then reinstalling it.
the printer is now working properly Which of the following was the cause of this issue?
- A. The print server spooler file was corrupt
- B. The toner level in the printer was extremely low.
- C. The font was changed by the user in the printing preferences.
- D. Drivers on the users' workstations were out of date
- E. There were several print jobs hung in the queue
Answer: D
NEW QUESTION 59
A technician is setting up a WiFi-enabled thermostat for a customer, but the customer is concerned about
IoT devices getting hacked.
Which of the following BEST address the customer's concerns? (Choose two.)
- A. Disable wireless access on the thermostat to make it unshakable.
- B. Separate the IoT thermostat by segregating it in a DMZ network.
- C. Enable two-factor authentication for the IoT device's cloud account, if it is available.
- D. Upgrade the customer's wireless network encryption to WPA.
- E. Use the latest encryption standard on the wireless network and set a strong password.
- F. Upgrade the customer's router to the latest version to improve network security.
Answer: B,E
NEW QUESTION 60
A laptop is overheating. A technician checks that the laptop is clean and free from dust buildup. Which of the following should the technician check NEXT?
- A. If all system fans are functioning
- B. If the PSU is working properly
- C. If the cooling management policy is correct
- D. If the CPU heat sink is seated properly
Answer: D
NEW QUESTION 61
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company's WLAN as all e-mail services are on default non-secure ports.
The company's WLAN is broadcasting across the company for easier access. Both incoming and outgoing servers require login credentials.
Use the following parameters:
* Email address tech@techies com
* Password P@SSwOrd
* Pop techies com Port 110 Security. None
* IMAP techies com Port 993 Security SSL
* smtp.techies.com Port 465 Security: TLS
* Company SSID Techies
* Security WPA2
* Passphrase P@SSwOrd
* SSID is not broadcasted
INSTRUCTIONS:
Update the mobile device's parameters to fit the criteria.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
See explanation below
NEW QUESTION 62
A user is connected to a docking station with an optical drive and is trying to back up personal files to removable media, but is encountering write errors. Which of the following is MOST likely cause of the errors?
- A. The files are not compatible with the type of disk used
- B. There is a corrupt file on the hard drive
- C. The files are encrypted
- D. The disk has already been finalized
Answer: D
NEW QUESTION 63
A technician is talking to end users about the specifications for an upgraded application server. The users of the application report that there cannot be any unscheduled downtime or data loss. Additionally, they would like the performance of the application to improve over the previous server in any way possible. The previous server running RAID 5.
Which of the following RAID solutions should be implemented in this scenario?
- A. RAID 0
- B. RAID 6
- C. RAID 2
- D. RAID 10
Answer: D
NEW QUESTION 64
A laptop is used aboard an aircraft that experiences frequent turbulence and a variety of extreme temperatures. Which of the following should a technician install to prevent data loss given the environment?
- A. Floppy drive
- B. Optical drive
- C. Solid state drive
- D. Magnetic disk drive
Answer: B
NEW QUESTION 65
A user has returned to headquarters from a remote office and is unable to connect a laptop to the office wireless network. After verifying that the user's laptop is permitted to connect to the headquarters wireless network, the technician should confirm
- A. if proxy server settings are disabled.
- B. if the laptop has an APIPA address.
- C. if a check for IP conflicts is complete
- D. if airplane mode is turned off.
Answer: D
NEW QUESTION 66
A technician received a call that the network printer was printing garbled text. The technician printed a test page from several users' workstations and received the same result The technician then ran a diagnostic on the printer, and everything passed After uninstalling the printer from a user's workstation and then reinstalling it. the printer is now working properly Which of the following was the cause of this issue?
- A. The print server spooler file was corrupt
- B. The toner level in the printer was extremely low.
- C. The font was changed by the user in the printing preferences.
- D. Drivers on the users' workstations were out of date
- E. There were several print jobs hung in the queue
Answer: D
NEW QUESTION 67
Which of the following ports would allow for the remote management of network devices using community strings? (Select TWO).
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
- F. 5
Answer: B,D
NEW QUESTION 68
A user calls the help desk regarding a problem connecting a laptop to the Internet.
When the laptop was plugged into the docking station, there was no connection.
The technician determines the external mouse is not working.
Which of the following should the technician perform FIRST to troubleshoot the issue?
- A. Ask the user to run virus and malware scans.
- B. Reseat the network connections and retry.
- C. Advice the user to purchase a new docking station.
- D. Ensure power connections are properly seated.
Answer: D
NEW QUESTION 69
Ann. a user, calls the help desk to request a Windows 10 VM on her workstation to test a third-party application. Ann is concerned about system instability, since the application is resource intensive and requires a minimum of 8GB of RAM, two processor cores, and 250GB of HDD space. Ann's machine currently has
32GB of RAM. an eight-core processor, and a 2TB HDD. Which of the following BEST describes a system configuration that will ensure both VM and host system stability?
- A. Configure the VM with three processor cores, 12GB of RAM. and 350GB of HDD space.
- B. Configure the VM with four processor cores. 16GB of RAM. and 500GB of HDD space.
- C. Configure the VM with two processor cores, 8GB of RAM, and 250GB of HDD space.
- D. Configure the VM with one processor core, 6GB of RAM, and 250GB of HDD space.
Answer: B
NEW QUESTION 70
Company management wants to be able to give users the ability to work remotely during periods of bad
weather. Which of the following should be enabled to allow the workforce to do this?
- A. VPN
- B. NAT
- C. HIPS
- D. VLAN
Answer: A
NEW QUESTION 71
A technician troubleshoots and fixes an issue. The technician then verifies the system is functional Which of the following is the NEXT step the technician should take?
- A. Question the user for more information
- B. Establish a plan of action.
- C. Establish a theory of probable cause
- D. Document the findings
Answer: B
NEW QUESTION 72
A technician replaced a broken LED screen on a mobile computer. The operating system can be seen
perfectly on screen, but the touch screen is non-responsive.
Which of the following are the MOST probable root causes for the given failure? (Choose three.)
- A. The digitizer cable is not seated properly on the motherboard.
- B. The grounding screws are not securely attached.
- C. The hardware replacement used is a non-touch-screen.
- D. The touch screen must be calibrated after a replacement.
- E. The replacement part is dead-on-arrival.
- F. The LCD panel firmware must be updated.
- G. The new touch-screen drivers must be installed.
Answer: A,C,G
NEW QUESTION 73
A server administrator set up a VM to be used in a lab setting. A technician is setting up thin-client computers to access this VM. Which of the following tasks are required to complete the project? (Choose three.)
- A. Connect the device to a printer.
- B. Connect the device to the network.
- C. Install the latest system updates.
- D. Install the operating system.
- E. Connect the device to a monitor.
- F. Install the necessary applications.
- G. Install a USB keyboard and mouse.
- H. Install the latest device drivers.
Answer: B,C,F
NEW QUESTION 74
A customer is having a problem with a newly installed home network. Three computers and a cable modern are connected into a SOHO router with Cat 5e cables. Computer 1 is able to access the Internet; however, Computer 2 and Computer 3 have no Internet access. A technician runs the ipconfig command on Computer 1:
Computer 1:
IPv4 address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 193.134.4.1
The technician then runs the ipconfig command on two other computers that are NOT able to access the Internet:
Computer 2:
IPv4 address: 192.168.1.101
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Computer 3:
IPv4 address: 192.168.1.102
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Which of the following is the MOST likely reason Computer 2 and Computer 3 cannot access the Internet?
- A. Computer 2 and Computer 3 are not receiving a response from the router's DHCP service. The technician should enable DHCP.
- B. The DHCP client service is disabled on Computer 2 and Computer 3. The service should be enabled to receive the correct network settings.
- C. The gateways are misconfigured on Computer 2 and Computer 3. The gateways on both computers should be set to 193.134.4.1
- D. The subnet masks are misconfigured on Computer 2 and Computer 3. The subnet mask on both computers should be set to 255.255.252.0.
Answer: C
NEW QUESTION 75
Which of the following devices is used to implement network security policies for an environment?
- A. Firewall
- B. managed switch
- C. Gateway
- D. Repeater
Answer: A
NEW QUESTION 76
A user is participating in a weight-loss challenge and needs to keep track of fitness activities, locations, distances, and calories burned during a specific time period. The user wants to be able to listen to music while participating in the challenge.
Which of the following would the user MOST likely need to purchase to meet these requirements?
- A. Fitness tracker
- B. AR headset
- C. Smartphone
- D. Fitness application
Answer: C
NEW QUESTION 77
A technician needs to routinely run scripting commands in Linux but does not want to walk over the server room every time to perform the task. The technician also travels between buildings and has a Windows 10 laptop with 4GB of memory and a fully partitioned 500GB hard drive. Which of the following steps should the technician take to resolve this issue? (Choose two.)
- A. Install Linux on a new ext3 partition.
- B. Add another 500GB hard drive.
- C. Install a Linux guest VM.
- D. Repartition the hard drive.
- E. Create a Linux LiveBoot CD.
- F. Increase the memory to 8GB.
Answer: A,D
NEW QUESTION 78
While troubleshooting a magnetic hard drive, a technician hears a loud clicking noise, identifies S.M.A.R.T.
errors, and notices the operating system will not load. Which of the following is MOST likely the issue?
- A. The CPU is overclocked.
- B. The read/write head is failing.
- C. The cooling fans are faulty, causing overheating.
- D. There are mismatched memory modules.
Answer: B
NEW QUESTION 79
A customer is experiencing issues connecting to a server over the network during normal business hours. Historically, the connection has worked fine, but it has become intermittent over the past 24 hours. Sometimes the share is available, and sometimes the customer gets an error. A technician researches the issue and discovers a new IT vendor visited the customer's site and installed some new computer equipment without consulting the internal team. Which of the following represents the MOST likely reason the customer is having issues connecting to the server?
- A. A firewall is blocking the SMB ports.
- B. A server was taken offline for routine maintenance.
- C. There is an IP address conflict on the network.
- D. Disabled legacy protocols need to be updated.
Answer: C
NEW QUESTION 80
A technician is troubleshooting a computer that powers off when it is placed under a heavy load Hardware diagnostics show the CPU reaches a maximum temperature of 60BC Which of the following should the technician perform NEXT?
- A. Upgrade to a water cooling system
- B. Install a higher-wattage power supply
- C. Install additional case fans
- D. Reapply thermal paste to the heat sink
Answer: A
NEW QUESTION 81
......
Ultimate Guide to Prepare 220-1001 Certification Exam for A+: https://lead2pass.testpassed.com/220-1001-pass-rate.html