Try JN0-252 Exam Valid Dumps with Instant Download Free Updates
JN0-252 Dumps First Attempt Guaranteed Success
NEW QUESTION # 29
What are two prerequisites for adopting Juniper switches for Wired Assurance? (Choose two.)
- A. an activation code
- B. a claim code
- C. a Wired Assurance license
- D. an account on manage.mist.com
Answer: A,C
Explanation:
Reference: https://www.juniper.net/us/en/products/cloud-services/wired-assurance.html
NEW QUESTION # 30
What are three alert levels used in the Mist UI? (Choose three.)
- A. error
- B. informational
- C. warning
- D. notice
- E. critical
Answer: B,C,E
NEW QUESTION # 31
Which two statements correctly describe Mist claim codes and activation codes? (Choose Two.)
- A. Claim codes may be used to claim only one AP.
- B. Activation codes may be used to claim multiple APs at once.
- C. Claim codes may be used to claim multiple APs at once.
- D. An activation code is primed on a slicker on the AP.
Answer: A,B
Explanation:
Claim Codes: Claim codes are unique to each AP and can be used to claim only one AP at a time. This ensures each device is correctly registered and managed individually within the Mist system.
Activation Codes: Activation codes can be used to claim multiple APs at once, facilitating bulk onboarding and simplifying the setup process for large deployments.
Reference:
Juniper Mist Claim and Activation Codes
Mist Setup Guide
NEW QUESTION # 32
Which two categories are included in the Connectivity Marvis Action? (Choose two.)
- A. Offline AP
- B. DNS Failure
- C. Bad Cable
- D. ARP Failure
Answer: B,D
NEW QUESTION # 33
Which unit of measurement Is used for capacity, coverage, and throughput SLEs?
- A. throughput In Mbps
- B. signal strength in dBm
- C. percentage of channel utilization
- D. percentage of user minutes
Answer: A
Explanation:
For capacity, coverage, and throughput Service Level Expectations (SLEs) in Mist AI, throughput is measured in Mbps. This unit measures the rate at which data is successfully delivered over the wireless network, providing a clear indication of network performance and user experience. Mist AI tracks these metrics to ensure the network meets the required performance standards.
Reference:
Wireless Throughput SLE
Service Level Expectations (SLE)
NEW QUESTION # 34
...are asked to enable Mist management at an existing site with previously configured EX3400 brownfield switches, and to add a new greenfield switch, which statement is correct in this scenario?
- A. You can mix brownfield switches and greenfield switches as long as they are running a Mist-supported version of Junos.
- B. You can mix brownfield switches and greenfield switches at the same site, but only if they are running the same version of Junos.
- C. Brownfield switches can be adopted but not managed.
- D. You cannot mix greenfield and brownfield switches at the same site.
Answer: A
Explanation:
* In the context of Mist management, "brownfield" switches refer to those that are already configured and deployed in a network, while "greenfield" switches are new and have no pre-existing configuration.
* Mist supports the integration and management of both brownfield and greenfield switches within the same site. The crucial requirement is that all switches, regardless of their initial state, must be running a version of Junos that is supported by Mist.
* This compatibility ensures that Mist can apply policies, configurations, and monitoring uniformly across all devices, facilitating a seamless management experience.
* Reference: Juniper Networks documentation on Mist AI and Junos compatibility requirements.
NEW QUESTION # 35
Manager asks you to set up a new WLAN that Is Open Access and does not allow any connected clients to communicate with each other, m the WLAN configuration, which feature would you use to separate the clients?
- A. Configure geofence.
- B. Filter ARP.
- C. Configure isolation.
- D. Hide SSID.
Answer: C
Explanation:
To set up a new WLAN that is Open Access and prevents connected clients from communicating with each other, you should use the Configure Isolation feature. This feature, often referred to as client isolation, ensures that each client can only communicate with the access point and not with other clients on the same WLAN.
Reference:
Juniper Mist WLAN Configuration Guide
Best Practices for WLAN Security
NEW QUESTION # 36
Which SLE reports RF interference?
- A. Coverage
- B. Roaming
- C. AP Health
- D. Capacity
Answer: A
NEW QUESTION # 37
Which SLE reports RF interference?
- A. Coverage
- B. Roaming
- C. AP Health
- D. Capacity
Answer: A
Explanation:
* In Mist's Service Level Expectations (SLE) framework, the Coverage SLE is responsible for reporting on RF interference.
* The Coverage SLE monitors the strength and quality of the wireless signal, ensuring that clients are receiving adequate coverage throughout the network. It also identifies areas where RF interference might be degrading the signal quality.
* By tracking RF interference, the Coverage SLE helps administrators diagnose and mitigate issues that could impact wireless performance and user experience.
* Reference: Juniper Networks documentation on Mist SLEs and their specific metrics.
NEW QUESTION # 38
A user called a help desk to report a Wi-Fi issue.
In this scenario, what information must be provided for Marvis to troubleshoot the issue? (Choose two.)
- A. user home address
- B. the MAC address of the client device
- C. the time of the incident
- D. the access point to which the client was connected
Answer: B,C
NEW QUESTION # 39
Which two Mist-supported APIs are considered event-driven? (Choose two.)
- A. WebSocket
- B. RESTful
- C. Webhook
- D. gRPC
Answer: A,C
NEW QUESTION # 40
Under Man/Is Actions, what is required for Marvis to provide a visualization of low coverage and low-capacity issues within the network?
- A. a floor plan
- B. a WAN edge device
- C. a cloud-ready switch
- D. a Premium Analytics subscription
Answer: A
Explanation:
For Marvis, Mist AI's virtual network assistant, to provide a visualization of low coverage and low-capacity issues within the network, a floor plan is required. This enables Marvis to map the coverage and capacity data to specific locations within the physical space, allowing for precise identification and troubleshooting of network issues.
Reference:
Juniper Mist AI Documentation
Marvis Actions
NEW QUESTION # 41
Which protocol does the REST API use?
- A. HTTP
- B. SSL
- C. SNMP
- D. syslog
Answer: A
Explanation:
Reference: https://www.juniper.net/documentation/us/en/software/junos/rest- api/topics/concept/rest-api-overview.html
NEW QUESTION # 42
Alert templates are assigned to sites in which area of the Mist GUI?
- A. Alert Template Configuration
- B. Site Configuration
- C. Site Group
- D. Organization Settings
Answer: A
Explanation:
Reference: https://www.juniper.net/documentation/us/en/software/nce/nce-214-midsize-branch- mist-pwp/topics/topic-map/nce-214-midsize-branch-mist-example_part2.html
NEW QUESTION # 43
Which protocol does Mist cloud use to send and receive data to connected access points?
- A. MQTT
- B. SSH
- C. PPTP
- D. HTTPS
Answer: D
Explanation:
Mist Cloud Communication Protocol: The Mist cloud platform uses HTTPS (Hypertext Transfer Protocol Secure) to communicate with connected access points. This ensures that the data sent and received is encrypted and secure, adhering to modern security standards (Juniper Networks) (CertEnsure).
Security and Reliability: Using HTTPS provides a secure channel over which configuration changes, updates, and monitoring data can be safely transmitted between the Mist cloud and the access points. This protocol is widely accepted and trusted for secure communications over the internet.
Incorrect Options:
MQTT: While MQTT is a lightweight messaging protocol often used in IoT, it is not the protocol used by Mist cloud for AP communication.
SSH: Secure Shell (SSH) is primarily used for secure remote command-line access and not for the primary communication between Mist cloud and APs.
PPTP: Point-to-Point Tunneling Protocol (PPTP) is used for implementing VPNs and is not relevant to the communication between Mist cloud and access points.
Reference:
Juniper Networks Documentation: Mist Cloud Communication
NEW QUESTION # 44
What is the minimum administrator role needed to invite a user to be an administrator of an organization?
- A. network admin
- B. installer
- C. super user
- D. helpdesk
Answer: C
NEW QUESTION # 45
How should a Mist AP43 be mounted?
- A. mounted horizontally on a table
- B. mounted vertically on a wall
- C. mounted horizontally on a ceiling
- D. mounted vertically above ceilings
Answer: C
NEW QUESTION # 46
Where in the Mist UI would the Persistently Failing Clients report be found?
- A. Successful Connects SLE
- B. Alerts
- C. Marvis Actions
- D. Insights
Answer: D
Explanation:
Reference: https://www.mist.com/documentation/august-26th-2021-updates/
NEW QUESTION # 47
Mist cloud supports single sign-on in which two scenarios? (Choose two.)
- A. account login used for the RESTful API
- B. account login used for NETCONF
- C. Wi-Fi guest login access
- D. admin login to the Mist portal
Answer: A,B
NEW QUESTION # 48
Which three components ate used to deploy location-based services? (Choose three.)
- A. SFP
- B. location engine
- C. BLE tags
- D. location sensors
- E. compact flash
Answer: B,C,D
Explanation:
To deploy location-based services in Mist, the following components are used:
Location Sensors: These devices capture the location data from BLE tags and other devices.
BLE Tags: These are small devices that emit Bluetooth signals to be picked up by location sensors.
Location Engine: This software processes the data from the sensors and tags to determine precise locations and provide analytics.
Reference:
Mist Location Services Documentation
Juniper Location Deployment Guide
NEW QUESTION # 49
Which two statements are correct about Juniper Mist Wired Assurance ZTP? (Choose two.)
- A. All legacy Juniper switch models are supported.
- B. The switch must be running a supported Junos version for Juniper Mist Wired Assurance.
- C. The technician must have console access to the switch during the Initial setup.
- D. The cloud-ready Juniper switch must either boot from the factory-default state or you can issue the request system zeroize Junos command to reset the configuration.
Answer: B,D
Explanation:
Supported Junos Version: For Juniper Mist Wired Assurance to function correctly, the switch must be running a supported Junos version. This ensures compatibility with Mist's cloud management and AI capabilities.
Factory-Default State or Zeroize Command: The switch must boot from a factory-default state, or you can use the request system zeroize command to reset its configuration. This is essential for seamless onboarding and auto-provisioning.
Reference:
Juniper Mist Wired Assurance Documentation
Wired Assurance Guide
NEW QUESTION # 50
Which language Is used to execute Marvis queries in the Mist Ul?
- A. Natural Language
- B. C++
- C. Structured Query Language (SOL)
- D. Python
Answer: A
Explanation:
Understanding Marvis Queries:
Marvis is the AI-driven virtual network assistant in Mist that helps with queries and troubleshooting.
Language Used for Queries:
Natural Language: Marvis is designed to understand and respond to natural language queries, making it user-friendly.
Python, C++, SQL: These are programming and query languages not used directly for Marvis queries.
Conclusion:
The correct answer is A (Natural Language).
Reference:
Mist Documentation on Marvis: Mist Documentation
NEW QUESTION # 51
......
100% Guarantee Download JN0-252 Exam Dumps PDF Q&A: https://lead2pass.testpassed.com/JN0-252-pass-rate.html